Table of Contents
Advertisement
Description-Front Panel
Front Panel Controls
STANDBY / ON
1
• When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on.
DISC TRAY
2
• Load the disc here.
DISPLAY
3
• Operation indicators are displayed here.
Front Panel Display
Angle indicator. You can select multiple angles
1
of a scene recorded by different cameras.
Disc type indicators
2
Reverse play / Pause / Forward play
3
Lights when 3D surround is turned on.
4
DVD : Title number
5
DVD : Chapter number.
6
Video/Audio CD : Track number
7
Repeat play mode
8
Linear PCM audio output
9
8
OPEN/CLOSE
4
• Press to open and close the disc tray.
PLAY/PAUSE
5
• Begin or pause disc play.
6
STOP
• Stops disc play.
SKIP
7
• Use to skip a scene or music.
PAL indicator
10
Dolby Digital Disc
11
DTS (Digital Theater System) output
12
MPEG-2 Audio output
13
Displays various messages concerning
14
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
R
L
Rear Panel
DIGITAL AUDIO OUT JACKS
1
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
ANALOG AUDIO OUT JACKS
2
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
3
• Use a video cable to connect to the Video input jack on your television.
4
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
5
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Scart Jack is selected, S-Video will not work.
• If S-Video is selected, Scart Jack will not work.
SCAT JACK
6
• Connect to a TV with scart input jack.
Description-Rear Panel
9
Advertisement
Table of Contents
