Cisco Linksys Wireless-B Quick Installation Manual page 7

D
The screen that appears will
show any available wireless
network. Select a network, and
then click the Connect button.
E
If your access point has WEP
encryption enabled, the
screen in Figure E will appear.
Enter the WEP key of your wire-
less network in the Network key
field. Click the Connect but-
ton.
Windows XP does not support
NOTE:
the use of a passphrase. Enter the
exact WEP key used by your access
point.
To find the WEP encryption key
settings of the other wireless
devices in your network, such
as the WAP11 Wireless Access
Point, you may use any
device's web-based utility to
check the WEP encryption
screen for the correct key
entries. If you are using other
manufacturers' access points,
refer to their documentation for
more information about WEP
encryption.
D
E
7