4. CHECKING THE HARDWARE STATUS
4.5.2 Hardware conditions that can be acquired by using remote notification
The following hardware conditions and settings can be acquired from a remote device:
• Fan condition
• Temperature condition inside the chassis
• Drive condition
• RAID status (D Model only)
• RAS function settings
• Operational mode (normal mode)
• Version information of the extended Management Information Base (MIB) for HF-BT.
The following transitions of the hardware conditions are notified by using a trap.
(1) Fan condition
• Normal → Error
• Error → Normal
(2) Temperature condition inside the chassis
• Normal → Error
• Error → Normal
(3) Drive condition
• Normal → Failure anticipated
• Normal → Used hours exceeded the threshold
(4) RAID status (D Model only)
• Optimal → Error (Degrade, Unknown, or Fail)
• Error (Degrade, Unknown, or Fail) → Optimal
(5) Operational mode
• HF-BT stopped → Started in normal mode
• Running in normal mode → Running in simulation mode
4-22