Feeding Or Ejecting Problems - Epson SC-P9500 Series User Manual

SC-P9500 Series/SC-P7500 Series User's Guide
Too much ink is fired.
Are the Media Type settings correct?
o
Make sure that the printer driver's Media Type
settings match the paper that you are using. The
amount of ink to be fired is controlled according to the
media type. If the settings do not match the paper
loaded, too much ink may be fired.
Is the Color Density setting correct?
o
Lower the density of the ink in the Paper
Configuration dialog box from the printer driver. The
printer may be firing too much ink for some paper. See
the printer driver help for more details on the Paper
Configuration dialog box.
Are you printing on tracing paper?
o
If too much ink is used when printing in Gray on
tracing paper, you may get better results by choosing
a lower print density in the Paper Configuration
dialog box.
Margins appear in borderless
printing.
Are the settings for the print data in the
o
application correct?
Make sure that the paper settings in the application
are correct as well as in the printer driver.
"Borderless Printing" on page 71
U
Are the paper settings correct?
o
Make sure that the paper settings of the printer match
the paper that you are using.
Have you changed the amount of
o
enlargement?
Adjust the amount of enlargement for borderless
printing. Margins may appear if you set the amount of
enlargement to Mid.
"Borderless Printing" on page 71
U
Problem Solver
Is the paper stored correctly?
o
The paper may expand or contract if it is not stored
correctly so that margins appear even when
borderless is set. See the documentation supplied
with the paper for more information on the storage
method.
Are you using paper that supports borderless
o
printing?
Paper that does not support borderless printing may
expand or contract while printing so that margins
appear even when borderless is set. We recommend
using paper that is designed to support borderless
printing.
Try adjusting the cutter.
o
When there are margins on the top and bottom of the
roll paper while performing borderless printing, try
performing Adjust Cut Position. It may reduce the
margins.
"Cutting the roll paper" on page 25
U

Feeding or ejecting problems

Unable to feed or eject paper.
Is the paper loaded in the correct position?
o
See the following for the correct paper loading
positions.
"Loading and Removing the Roll Paper" on
U
page 22
"Loading and Removing Cut Sheets/Poster
U
Board" on page 28
If the paper is loaded correctly, check the condition of
the paper that you are using.
Is the paper loaded in the correct direction?
o
Load cut sheets vertically. If they are not loaded in the
correct direction, the paper may not be recognized
and an error may occur.
"Loading and Removing Cut Sheets/Poster
U
Board" on page 28
Is the paper creased or folded?
o
Do not use old paper or paper with folds in it. Always
use new paper.
146