How It Works; Setting Up Your Humidifier - Honeywell HEV320 Series Instruction Manual

HEV320 Series HUMIDIFIER

How it Works:

A Wicking Filter inside the humidifi er absorbs water from the reservoir. A fan pulls dry air from
the room into the humidifi er where it passes through the saturated Wicking Filter. The fi lter
captures minerals and other impurities from the water, before the moisture is evaporated back
into the dry room with the help of the fan. The amount of moisture output depends on many
factors, including the current room humidity and temperature. As the humidity level in the
room increases, the moisture output decreases, which prevents over humidifi cation.
Motor Housing
Power Knob
Wicking Filter

SETTING UP YOUR HUMIDIFIER

1. Remove packaging
material. Keep this
Instruction Manual
for future reference.
2. Remove twist tie and
extend power cord.
3. Place the humidifi er
on a fi rm, level, water resistant surface at least 12" (30 cm) from any walls. Do not block
Intake Grill on base of unit. Do not place on surfaces that can be damaged by water.
Output Grill
Tank Cap
Step 1
Tank Handle
Water Tank
Water Reservoir
Base
Intake Grill
Step 2
Plunger Gasket
Tank Gasket
Spring Valve
Plunger
Step 3
3