Overview The STB-2101H is a set-top box that connects your television to the Internet. Use the STB-2101H to watch Internet television (IPTV) or Video on Demand (VOD) on your regular TV. How It Works Your STB-2101H IP Set-Top Box (A) connects to your Internet access device (B);...
Use either the cables that came with your STB-2101H, or those that came with your TV or Internet access device. 1. Connect your TV (and audio system, if required) to the STB-2101H’s audiovisual ports using either the included cables or those that came with your TV.
Page 5
The STB-2101H has a variety of options for connecting your TV (and audio system). Use the hardware connections best suited to your equipment; the following figure shows some examples. Turn On the STB-2101H Once you have made the hardware connections, take the following steps to start up the STB-2101H.
Page 6
2. Press the ON/OFF button on the rear of the STB-2101H. The Power LED on the front of the STB-2101H lights up. It blinks while the STB-2101H is starting up, then shines steadily green once the STB-2101H is ready (this may take a little while).
3. Replace the cover. Quick Reference The following picture shows your STB-2101H’s remote control, and identifies the buttons you need to use in this Quick Start Guide. See the...
Page 8
This is only an example - the actual menus you see depend on your IPTV service provider. When the STB-2101H is ready to use, the Home menu displays. Use the HOME key on the remote control to return to this menu at any time.
Page 9
ENGLISH For Live TV, the channel selection menu displays. For VOD, the VOD menu appears.
Page 10
2. For Live TV, highlight the channel you want to watch using the navigator’s shows the current program. For VOD, highlight the video you want to watch. 3. Press the OK key. The program is shown in full screen. 4. For Live TV, use the CHANNEL + and - keys to change the channel. For VOD, use the video controls to rewind, fast-forward, pause and so on.
ENGLISH Remote Control Reference The following figure shows the front of the STB-2101H’s remote control, and identifies its buttons.
Page 12
Video Controls Help FUNCTION Use this to turn the STB-2101H on, or put it in standby mode (use the ON/OFF switch on the STB-2101H’s rear panel to turn it off). Use this to change the audio balance between the left and right speakers.
• To go back to numeric mode, press the KEYB key again. FUNCTION Use this to access the STB-2101H’s setup menus. (This key is reserved for future use.) (These keys are reserved for future use.) Use this to enter letters and symbols.
Page 14
The following table shows the characters you can enter: [SPACE] Licensed Hardware Codecs Supply of this product does not convey a license or imply any right to distribute content created with this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), streaming applications (via Internet, intranets and/or other networks), other content distribution systems (pay-audio or audio-on- demand applications and the like) or on physical media (compact discs,...
Page 15
2. Select your product from the drop-down list box on This product contains in part some free software distributed under GPL license terms and/or GPL like licenses. Please visit " opensource.zyxel.com/STB/STB-2101H/ terms and additional information. To obtain the source code covered under those Licenses, please check support@zyxel.com.tw to get it.