Getting Started; Mode Led - Canon FV-100 User Manual

Press on the upward button and slide the MicroSD card cover upward to open it.
Insert the smaller end of the supplied USB cable into the device and other end into a
chargeable USB adapter.
The Mode LED will turn red to indicate charging.
Once fully charged, the Mode LED will turn green.
- Operating time may vary depending on the battery status, operational status and
environment conditions.
An external MicroSD card (up to 256 GB) is needed for saving captured photos.
Only FAT16, FAT32 and exFAT format are supported.
PREPARING A MEMORY CARD
Use the following memory cards (sold separately)
• MicroSD memory cards *1
• MicroSDHC memory cards *1 *2
• MicroSDXC memory cards *1 *2
*1 Cards conforming to SD standards. However, not all memory cards have been verified
to work with the camera.
*2 UHS-I memory cards are also supported.
INSTALL AND REMOVE THE MICROSD CARD
• Open the MicroSD Card Cover
• Insert the MicroSD card into the slot at the bottom of the device. You will feel a slight
click when the card is fully inserted .
• Push on the top of the card to release it. Gently pull to fully remove the card from the
device.
• If there is an error on reading /writting to the MicroSD card. Remove the MicroSD card
and restart the device.
• Connect the device to a computer by USB cable. Double-click the external drive image
when it appears on the computer to view and save the photos.

GETTING STARTED

CHARGING

MODE LED

Charging: Red
Full: Green
INSERTING SD CARD
3