COMPLIANCE: The responsible party for this device compliance is: Zenith Electronics Corporation 1-201-816-2000 Marked and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 http://www.zenith.com...
Safety Instructions Safety Instructions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the appara- tus.
Safety Instructions Safety Instructions 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
Page 6
Controls Controls - This is a representation of the front panel of models Z56DC1D, Z62DC1D series TVs. - Here shown may be somewhat different from your TV. ENTER INPUT MENU POWER Button ENTER Button INPUT Button MENU Button Function Status Indicators Function Status Indicators - Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the- operating status of the DLP projection TV.
Connection Options Connection Options - This is the back panel of models Z56DC1D, Z62DC1D series TVs. AC IN AC IN COMPONENT IN VIDEO COMPONENT IN 1/2 AUDIO SERVICE ONLY SERVICE ONLY Back Connection Panel Back Connection Panel ANTENNA COMPONENT IN RGB IN AV IN 1 AV OUT...
Page 8
Controls Controls - This is a representation of the front panel of models Z52DC2D series TVs. - Here shown may be somewhat different from your TV. INPUT MENU POWER Button INPUT/ENTER Button MENU Button Function Status Indicators Function Status Indicators - Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the- operating status of the DLP projection TV.
Page 9
Connection Options Connection Options - This is the back panel of models Z52DC2D series TVs. AC IN AC IN COMPONENT IN VIDEO COMPONENT IN 1/2 AUDIO SERVICE ONLY SERVICE ONLY Back Connection Panel Back Connection Panel CABLE IN ANTENNA AV IN 1...
Page 10
A/V devices. A/V DEVICE Any device that produces video or sound (VCR, DVD, cable box, or television). 10 DLP Projection TV Front Connection Panel Front Connection Panel Z52DC2D Z56DC1D, Z62DC1D AV IN 2 LEFT/RIGHT AUDIO...
Remote Control Key Functions Remote Control Key Functions - When using the Remote Control, aim it at the remote control sensor on the TV. MODE Select the remote oper ting mode: TV, VCR, Cable, DVD and SatelliteSelect other operating modes, for theremote to control external devices.
Remote Control Key Functions Remote Control Key Functions RGB-PC Selects the RGB-PC input mode. In other input sources, change to theRGB- PC mode. TIMER Lets you select the amount of time- before your TV turns itself off auto- matically. Selects MTS sound: Mono, Stereo, and SAP in Analog mode.
External Equipment Connections External Equipment Connections 1. Analog and Digital TV signals provided on antenna - Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket VHF Antenna...
3. Analog and Digital TV signals provided on cable and antenna Antenna Cable TV Wall Jack ANTENNA Note: The TV will let you know when the TV(analog antenna), DTV(digital antenna), CATV(analog cable) and CADTV(digital cable) channel scans are complete. VCR Setup VCR Setup Connection Option 1 Set VCR output switch to channel 3 or 4 and then tune the...
External A/V Source Setup External A/V Source Setup How to connect Connect the audio and video cables from the external equip- ment's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to external equipment, match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red).
HDSTB Setup HDSTB Setup - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. - This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
Digital Audio Output Digital Audio Output Send the TV’s audio to external audio equipment (stereo system) via the Digital Audio Output (Optical) port. How to connect 1. Connect one end of an optical cable to the TV Digital Audio (Optical) Out port. 2.
PC Setup PC Setup - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. - The TV perceives 640x480, 60Hz as DTV 480p based on the PC graphic card, change the screen scanning rate for the graphic card accordingly.
Page 19
Notes: - Depending on the graphics card, DOS mode may not work if a HDMI1 to DVI Cable is in use. - When Source Devices connected with HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position and Size may not fit to Screen. As shown the picture below, press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center.
Screen Setup for PC mode Operation Operation • When RGB connect to PC input and select the RGB-PC in Main Input, this function is used. • In RGB-PC mode, POSITION, SIZE, PHASE, RESET is available. • In RGB-DTV mode, SIZE, PHASE is not available. •...
Operation Operation urning the TV On urning the TV On * In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just an example to help you with the TV operation. Turning on the TV just after installation 1.
TV Setup TV Setup On-screen Menus Language Selection On-screen Menus Language Selection - The menus can be shown on the screen in the selected language. First select your language. Aspect Ratio Caption/Text Caption Option Language Low Power 1. Press the MENU button and then use 2.
Setup Menu Options Setup Menu Options EZ Scan (Channel Search) EZ Scan (Channel Search) - Automatically finds all available channels through antenna or cable inputs, and stores them in memory on the channel list. - Run EZ Scan again after any Antenna/Cable connection changes. EZ Scan Manual Scan Channel Edit...
Channel Edit Channel Edit Create two different types of channel lists in memory: “Custom List” and “Favorite List” from the default channel list cre- ated from the EZ Scan channel search. A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black color, and the channels deleted from the Custom List are displayed in gray color.
Input Source Selection Input Source Selection Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV. EZ Scan Manual Scan Channel Edit DTV Signal Input Input Label 1.
ideo Menu Options ideo Menu Options Auto Picture Control (EZ Picture) Auto Picture Control (EZ Picture) EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based on the program category. In the , and modes only, user can directly adjust the contrast, brightness, color, sharpness, tint.
Color emperature Control Color emperature Control Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. EZ Picture Color Temperature Advanced Video Reset 1.
Page 28
Audio Menu Options Audio Menu Options Manual Color Temperature Control You can also adjust the detailed settings(Red, Green, Blue) by selecting the EZ Picture Color Temperature Advanced Video Reset 1. Press the MENU button and then use 2. Press the button and then use D D / E E 3.
Page 29
XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced dig-ital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual and when select- ing Manual, you can adjust the XD Contrast, XD color and XD Noise.
Advanced-Cinema 3:2 Mode / Black Level Advanced-Cinema 3:2 Mode / Black Level • Cinema 3:2 Mode - Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode),the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Analog,AV1,AV2,Component 480i mode.) •...
ideo Reset ideo Reset Use to quickly reset all the Video menu options to their original factory preset values. EZ Picture Color Temperature Advanced Video Reset 1. Press the MENU button and then use 2. Press the button and then use 3.
Audio Menu Options Audio Menu Options Audio Language Audio Language Other languages may be available if a digital signal is provided by the broadcasting station. Audio Language EZ SoundRite EZ Sound Balance TV Speaker 1. Press the MENU button and then use 2.
Auto Sound Control (EZ Sound) Auto Sound Control (EZ Sound) EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Normal,Stadium,News,Music and Theater are preset for good sound quality at the factory and are not adjustable.
Balance Balance Adjust the left/right sound of speaker to suit your taste and room situations. Audio Language EZ SoundRite EZ Sound Balance TV Speaker 1. Press the MENU button and then use menu. 2. Press the button and then use 3.
ime Menu Options ime Menu Options Auto Clock Setup Auto Clock Setup The time is set automatically from a digital channel signal. The digital channel signal includes information for the current time provided by the broadcasting station. Set the clock manually, if the current time is set incorrectly by the auto clock function through Digital Channel Service problem.
On/Of imer Setup On/Of imer Setup Timer function operates only if current time has been set. Off-Timer function overrides On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode.
Auto Of Auto Of If set to on and there is no input signal, the TV turns off automatically after 10 minutes. Auto Clock Manual Clock Off Timer On Timer Sleep Timer Auto Off 1. Press the MENU button and then use 2.
Option Menu Features Option Menu Features Aspect Ratio Control Aspect Ratio Control This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV,you need to specify the pic ture is to be displayed.
Caption/T Caption/T Analog Broadcasting System Captions Select a caption mode for displaying captioning information if provided on a program. Analog caption displays information at any position on the screen usually the program's dialog. Text displays information, usually at the bottom position and is used for a data service, generally not program related. Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Caption Option Caption Option Customize the DTV/CADTV captions that appear on your screen. Aspect Ratio Caption/Text Caption Option Language Low Power 1. Press the MENU button and then use 2. Press the button and then use D D / E E 3.
Lock Menu Options Lock Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed.
Parental Lock Setup Parental Lock Setup Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Input Block 1.
Split Zoom (DTV 720p, or 1080i mode only) - Enlarges the picture with correct proportions. - When enlarging the picture, the image may become distorted. 1. Press the FREEZE button in DTV 720p, or 1080i modes. 2. Use the buttons to select the screen split zoom section. D D / E E / F F / G G 3.
Brief Info. Function : • Show the present screen information. • On Watching with the upper Input signal, press the INFO button. • Press the INFO button or EXIT button to exit. A: Banner information B: Program title C: Day, Month, Year D: Program start time E: Program finish time F: Show the prosessing rate...
Programming the Remote Programming the Remote The Remote Control for your HD receiver is a multi-brand or universal Remote Control that can be programmed to operate most remote-controllable devices of other manufacturers. Note: The Remote Control may not be able to control all models of other brands. 1.
roubleshooting Checklist roubleshooting Checklist No picture & No sound Picture OK & No sound The remote control doesn’t work Picture appears slowly after switching on No or poor color or poor picture Horizontal/vertical bars or picture shaking • Check whether the TV is turned on. •...
Page 50
No output from one of the speakers Unusual sound from inside the TV Poor TV input signal Poor Video signal No channel or a few channel Unsuitable Aspect Ratio 50 DLP Projection TV • Adjust in the menu. (Refer to p.34) •...