Cleaning The Blender And Accessories - KitchenAid KSB13 Series Manual

PREPARING AND USING THE CITRUS PRESS
3
4
2
1
5
CARE AND CLEANING

CLEANING THE BLENDER AND ACCESSORIES

Clean the Blender and accessories thoroughly after every use.
NOTE: To avoid damaging the Blender, do not immerse the Blender base or cord in water.
To avoid scratching the Blender, do not use abrasive cleansers or scouring pads.
1
2
3
Turn the Control Dial from (O) to speed (1).
Hold down the halved citrus fruit on the Reamer.
When finished juicing, turn the Blender off by returning
Control Dial to (O).
Unplug the Blender.
Twist the Juice Container counterclockwise and lift it
by using handle.
Pour and enjoy!
To clean the Blender base and cord: Unplug the
Blender before cleaning. Wipe clean the base and
the cord with a warm, damp cloth and dry with a soft
cloth.
Wipe clean the Citrus Press Gear Assembly with a
warm, damp cloth and dry with a soft cloth.
Remove any remaining contents from the Jar.
Fill half of the Jar with warm water, and add 1 or 2
drops of dish-washing liquid.
Place the Blender Jar on the base. Make sure the
Blender Jar is fully seated in the base. Secure the Lid
on the Jar, turn the Control Dial to speed (3), and run
the Blender for 15-20 seconds. Remove the Blender
Jar, empty contents and rinse with warm water.
The Personal Jar, Small Batch Jar, Lids, Blade
Assembly, and Lid Center Cap can be cleaned in the
top rack of a dishwasher.
The Blender Jar can be cleaned in the bottom rack of
a dishwasher.
CARE AND CLEANING | 9