Installation
Installation specifications for built-in purposes
•
Gloves and safety goggles should be worn during installation.
•
It is not recommended to install the appliance into a corner or directly beside a wall.
The door will need to be opened more than 90° to allow full extension of the shelves.
If it is necessary to place the unit next to a wall or in a corner, leave at least 2-4
inches (5-10 cm) of space between the wall and the appliance to allow for the door
opening.
•
The cabinet opening must be at least 24 inches (61.0 cm) wide by 34
cm) high by 24 inches (61.0 cm) deep.
NOTE
The listed depth requirement is assuming that the electrical outlet is located in the
adjacent cabinetry, not surface mounted inside the enclosure.
If the electrical outlet is located inside adjacent cabinetry, cut a 1
diameter hole to admit the power cord. If the cabinet wall is metal, the hole edge
must be covered with a bushing or grommet
1 /4
inches (87.0
1 /2
inch (3.8 cm)
English 19