Preparation For Playback (Recording); Playback (Recording) Preparation - Kenwood X-W320 Instruction Manual

Preparation for playback (recording)

Before playback (recording)

Playback (recording) preparation

1
Load a cassette tape in deck A or B.
1 Press the 0 button.
2 Insert a tape and close the cassette holder.
2
Select the tape transport direction.
1 Press the 2 key or 3 key.
2 Press the 7 key.
3
Determine the playback (recording) condition.
Downloaded from: http://www.usersmanualguide.com/
Set the POWER sw itch to ON.
POWER
- ON – OFF
0
Deck A:
Playback
only.
A
To play (record) tape side A.
2
7
To play (record) tape
side B.
÷ Feed the tape section w hich cannot be played
or recorded onto in the forw ard direction.
2
7
1 Select the playback (recording) mode.
REV.
MODE
2 Select the Dolby NR mode.
DOLBY NR
: Keys and control used in the operations described on this page.
÷ Be sure to remove tape slack before insertion.
÷ The type of tape, that is, the Normal or High position is selected
automatically.
÷ This unit cannot record sound on a M etal tape.
÷ Be sure to close the cassette holder securely by pushing it.
Deck B:
Playback/
recording
available.
B
Tape transport direction indicators
The 2 and 3 indicators show the direction the tape is transported
during recording or playback. The direction used w hen the tape is
3 last stopped is held in memory even after this unit has been turned
OFF, and the tape transport starts in the indicated direction w hen
the unit is started automatically by a timer, etc. To change the tape
transport direction, press the play key for the opposite direction and
immediately press the 7 key.
Deck A direction indicators.
3
Each press sw itches the indication.
1 " [ " :Double-side playback (recording) w hich stops tape stops
2 " " " :Playback is endless, but recording stops after having
3 " " " :One-w ay playback (recording) w hich stops tape after
Each press sw itches the indication.
1 DOLBY NR " OFF" (extinguished): Dolby NR is not used.
2 DOLBY NR " B" : Noise reduction of the ordinary type.
3 DOLBY NR " C" : Noise reduction w ith higher performance.
÷ Select the Dolby NR mode according to the tape recording status.
Normal position TYPE
High position TYPE
20 15 10 6 3
L
R
DUBB. NOR. (SP) HIGH
DOLBY NR B C
0 0 0 0
STANDBY
A B
COUNTER
after having played (or recorded) both sides.
recorded both sides.
having played (or recorded) a single side.
X-W 3 2 0 (En)
Deck B direction indicators.
0 3 6 (dB)
CCRS O.T.E.
1 1