Download Print this page

Grizzly T26858 Instructions

Hand winch w/nylon strap

Advertisement

Quick Links

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
To reduce the risk of serious personal injury
while using this winch:
1.
Always wear ANSI approved eye protec-
tion and gloves when operating.
2.
Be sure strap is not damaged. If strap
shows any signs of fraying or other
damage, do not use winch.
3.
Do not exceed specified pulling capac-
ity of winch.
4.
Do not stand in line with strap while
operating winch. If strap breaks, it will
whip back along this line.
5.
Keep all loose clothing, hair, jewelry
and hands away from winch during
operation.
6.
Use a spotter to help ensure safety
when using winch. Be sure spotter is
clear of vehicle and strap before operat-
ing winch.
7.
Do not replace strap with one of lesser
strength.
8.
Do not loop strap around an object or
attach hook to strap. Attach hook to a
separate chain or towing strap instead.
9.
Do not use winch to lift vertical loads.
It is only designed for horizontal loads.
Lifting vertical loads may cause winch
to fail and drop the load.
10. Do not use winch to support loads for
long periods of time.
11. Avoid yanking or jerking strap while
loading. This may cause winch to
release the load.
12. Do not attach hook to load when strap
is fully extended. Keep at least five full
turns of strap on the drum.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
COPYRIGHT © JULY, 2014 BY GRIZZLY INDUSTRIAL, INC.
#MN16687 PRINTED IN CHINA
MODEL T26858/T26859
HAND WINCH
w/NYLON STRAP
INSTRUCTIONS
Drum
Safety
Hook
Ratchet
Figure 1. Identification.
Specifications
T26858 Horizontal Pulling Capacity ..... 2000 lbs.
T26859 Horizontal Pulling Capacity ......2500 lbs.
Strap .............................................. 2 in. x 32
Ratchet .................... Two Directions w/Auto Stop
Gear Ratios
T26858 ..Low-Torque 4.1:1, High-Torque 9.8:1
T26859 . Low-Torque 5.1:1, High-Torque 12.2:1
Mounting Bolt Size ..........................................
Mounting Bolt Grade .............................. Grade 8
Keep hair, clothing, and
hands away from mov-
ing parts at all times.
Entanglement can result
in amputation or severe
crushing injuries!
Low-Torque
Axle
High-Torque
Axle
Crank
ft.
3
4
"
3
8

Advertisement

loading

Summary of Contents for Grizzly T26858

  • Page 1 MODEL T26858/T26859 HAND WINCH w/NYLON STRAP INSTRUCTIONS For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com Drum To reduce the risk of serious personal injury Safety while using this winch: Low-Torque Hook Always wear ANSI approved eye protec- Axle tion and gloves when operating.
  • Page 2 Mounting Crank Attachment The Model T26858/T26859 has holes in the base Use a 22mm wrench to secure the crank on either for mounting to most flat surfaces. The winch the low- or high-torque axle (see Figure 3). must be mounted for safe and effective operation.
  • Page 3 NLGI#2 grease or equivalent to the gear teeth, but keep grease away from strap. Never place ratchet in free spin mode while winch is under load. Doing so may result in property damage and serious personal injury. T26858/T26859 Hand Winch...

This manual is also suitable for:

T26859