Table of Contents
Advertisement
Easy Projection
Project Your Device Screen Wirelessly
For security reasons, after projecting your phone screen wirelessly to a large display (such as
a TV) for work or entertainment, notifications such as incoming call notifications, SMS
messages, and clock alarms will only be displayed on your phone.
1
Perform the following based on the model and functions of the large display:
If the large display supports Miracast, turn on its wireless projection switch.
•
If the large display does not support Miracast, connect a wireless HDMI adapter to
•
it. Ensure that the wireless HDMI adapter is connected to a power supply.
To check whether the large display supports Miracast and how to enable wireless
projection on it, consult the user guide or customer service of the large display
manufacturer.
2
On your device, swipe down from the status bar to open the notification panel, and turn
on
.
3
Swipe down again to show all shortcuts and enable Wireless Projection. Your device will
start searching for available display devices.
You can also go to Settings > More connections > Easy Projection and enable Wireless
Projection.
4
In the device list, touch the name corresponding to the large display or wireless HDMI
adapter to complete the projection connection.
After the connection is set up, you can place your phone in landscape mode for a better
display. Incoming call notifications, messages, and clock alarms are only displayed on your
phone. To change the settings, touch
To exit wireless projection, go to
Device Projection Using a Wired Connection
You can project your device screen on a large display (for example, a TV) using a wired
connection.
It is recommended that you purchase the accessories from authorised channels.
Projection Using a Type-C Cable
1
Prepare a Type-C cable.
Use a Type-C to HDMI, Type-C to DP, or Type-C to MiniDP cable depending on your large
display.
and disable Hide notifications.
> Disconnect.
Smart Features
38
Advertisement
Table of Contents
