Canon Amerigo Teddy Bear Assembly Instructions

Amerigo Teddy Bear : Assembly Instructions
Tools
Scissors
Paste, or woodwork glue
Stencil pen, or bodkin
Ruler
The Assembly instructions are divided into five blocks:
A (head), B (body), C (legs), D (arms), and E (Items).
Follow the instructions for each block to assemble your teddy bear.
marks a basic assembly technique that remains the same
regardless of the part. Instructions are printed only for the
first instance.
<Caution >
Keep scissors and glue away from small children.
Be careful not to cut your fingers when using scissors.
Notation Key
Scissors line
Mountain fold
Valley fold
Glue spot
A1, B1
Parts No.
Canon is a registered trademark of Canon Inc.
A
Assemble the head
Use patterns: Page2 / Page3.
Cut out A1 by cutting along the lines.
Cut along the line marked
Parts No.
Parts name
Glue down the glue
tabs one at a time
in turn.
The parts will be easier to assemble if curled.
Using the photo as a guide, apply pressure with the palm of your hand,
gradually curling the paper in the direction of the arrow.
A1
Add a slight curl to A1 when attaching it.
Attach the triangular glue tabs so that the front side becomes convex.
Using the photo as a guide, attach in the direction of the arrow.
First, glue together
the glue spots
indicated by the
red triangles.
Page
Katsuyuki Shiga ( PinoArt )
Cut a slot right in
. to the apex of
the triangular glue tab.
Glue spot
Scissors line
Triangular glue tab
A1
Glue together the remaining
glue spots.
A1
A1
1