Advertisement
Quick Links
Setup
This setup guide is intended to assist with installing your Wahoo RPM SPEED sensor on your
bike and pairing to the Wahoo Fitness app.
How to install the Wahoo RPM SPEED on your bike:
1. Slide the Wahoo RPM SPEED pod into the mount supplied. Make sure the Wahoo logo
is facing outwards on the flush side of the housing and the back of the Wahoo RPM
SPEED faces toward the hook side of the mount. The hooks should be facing downward.
2. Slide the rubber shim-strap into the back (the hooked) side of the mount so that the three
prongs of the strap fit snugly up against the top two hooks of the housing. The Wahoo
RPM SPEED is now ready to fit to the hub of either wheel as per your preference.
3. While holding the mount in place on your selected hub, gently stretch the strap portion of
the rubber shim-strap around the hub and secure using the bottom two hooks on the
mount. When installed correctly, the Wahoo RPM SPEED should not be in contact with
any other parts of your bike.
Your Wahoo RPM SPEED is now ready to be paired with the Wahoo Fitness app.
How to Pair your Wahoo RPM SPEED Sensor to the Wahoo
Fitness app (iOS):
1. Download the Wahoo Fitness app from the App Store.
2. Open the Wahoo Fitness app. Make sure you have Bluetooth turned on.
3. Activate the Wahoo RPM SPEED by shaking it for a few seconds or if attached to your
bike, spin the wheel a few times.
4. Select "Sensors" in the bottom left corner.
5. Select "Add New Sensor".
6. Choose your Wahoo RPM SPEED from the list of available sensors.*
7. Once certain you are connected to the correct sensor, select "Save Sensor".
8. Choose the workout profiles you would like your Wahoo RPM SPEED to be active for
(ex. Cycling & Indoor Bike Trainer).
9. Select "Done" to complete the pairing & workout selection process.
10. Select "Done" in the top left hand corner to exit the Sensors menu.
How to Pair your Wahoo RPM SPEED Sensor to the Wahoo
Fitness app (Android):
1. Download the Wahoo Fitness app from the Google Play Store.
2. Open the Wahoo Fitness app. Make sure you have Bluetooth turned on.
3. Activate the Wahoo RPM SPEED by shaking it for a few seconds or if attached to your
bike, spin the wheel a few times.
Advertisement
Related Manuals for Wahoo Fitness RPM SPEED
Summary of Contents for Wahoo Fitness RPM SPEED
- Page 1 1. Download the Wahoo Fitness app from the App Store. 2. Open the Wahoo Fitness app. Make sure you have Bluetooth turned on. 3. Activate the Wahoo RPM SPEED by shaking it for a few seconds or if attached to your bike, spin the wheel a few times.
- Page 2 5. Make sure the Wahoo RPM SPEED is synced to your device. It will appear in the list of Linked Sensors for that workout profile with an indication of signal strength shown on the far right when it is connected to your device.
- Page 3 6. Make sure the Wahoo RPM SPEED is synced to your device. It will appear in the list of Linked Sensors for that workout profile with an indication of signal strength shown on the far right when it is connected to your device (button located in the top right corner).
- Page 4 Setup This setup guide is intended to assist with installing your Wahoo RPM Cadence sensor on your bike or shoe and pairing to the Wahoo Fitness app. How to install the Wahoo RPM Cadence on your bike: Using the Silicone Mount: 1.
- Page 5 Your Wahoo RPM Cadence is now set up and ready for action. To use your Wahoo RPM Cadence, start a workout with one of the profiles you paired it with. The Wahoo Fitness app will remember this pairing in the future. You simply need to wake up your sensor and start a new...
- Page 6 Quick Blink (about twice every second): Wahoo RPM Cadence is paired to a device. * If a firmware update is available for your sensor, the Wahoo Fitness app will now prompt you to proceed with performing an update. If you do not, the update may be performed later. Sensors with updates available will appear in the menu of Saved Sensors marked with a badge to indicate the update is available but not installed.
- Page 7 1. To end your workout, simply select the red “Pause” button. 2. Select the red “Stop” button and either a) Discard b) Save or c) Cancel. 3. If you elect to save & finish the workout, the Wahoo Fitness app will now display a summary of your workout.