Plugging In This Unit - Yamaha RX V2095RDS Owner's Manual

PREPARATION

Plugging in this unit

• After completing all connections, plug the AC power cord
into an AC outlet.
(*1):
AC OUTLETS (3 SWITCHED OUTLETS)
Use these to connect the power cords of your components to
this unit.
The power to the SWITCHED outlets is controlled by this unit's
STANDBY/ON switch or the remote controller's SYSTEM
POWER ON and STANDBY keys. These outlets will supply
power to any connected unit whenever this unit is turned on.
The maximum power (total power consumption of components)
that can be connected to the SWITCHED AC OUTLETS is
100W.
26
SPEAKERS
REAR
( SURROUND )
ON MANUAL FOR CORRECT SETTING.
MAIN
A
B
(Europe model)
• Unplug the AC power cord from the AC outlet if this unit is
not to be used for a long period of time.
AC OUTLETS
SWITCHED
I00W MAX.
TOTAL
CENTER : 4 MIN. / SPEAKER
FRONT : 6 MIN. / SPEAKER
REAR : 6 MIN. / SPEAKER
MAIN A OR B: 4 MIN. / SPEAKER
A B : 8 MIN. / SPEAKER
CENTER : 8 MIN. / SPEAKER
FRONT : 8 MIN. / SPEAKER
REAR : 8 MIN. / SPEAKER
MAIN A OR B: 8 MIN. / SPEAKER
A B : I 6 MIN. / SPEAKER
SET BEFORE POWER ON
IMPEDANCE SELECTOR
To AC outlet
(*1)