Connections - Yamaha R-302 Owner's Manual

Before attempting to make any connections to or from this unit, be sure to first switch OFF the power to this unit and to any other
components to which connections are being made.
CONNECTIONS WITH OTHER COMPONENTS
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, "+" to "+" and "–" to "–". Also, refer to the owner's manual for each component to be connected to this unit.
If you have YAMAHA components numbered as 1, 2, 3, etc. on the rear panel, connections can be made easily by making
*
sure to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
Turntable
GND
FM 75
ANT
UNBAL.
GND
AM
ANT
PHONO CD 1 AUX
Compact disc player
:
Refer to "ABOUT THE ACCESSORY TERMINALS" on page 10.

CONNECTIONS

Tape deck
3 5 4 6
or or
TAPE REC
PB OUT
TAPE
Video cassette player,
LD player, etc.
Speakers A
Right
SPEAKERS
A
B
A OR B : 6 MIN./SPEAKER A B : l2 MIN./SPEAKER
Right
Speakers B
Left
(U.S.A. model)
AC OUTLETS
SWITCHED
I20V 60Hz
I00W MAX. TOTAL
To AC outlet
Left
9