Appendix
Guide to Utility Mode Functions
The following table briefly describes the functions that can be accessed using the UTILITY key. Each
function is listed in order of appearance. The number to the right of the function's descrption indicates the
page of this manual where you will find instructions on use of the function.
Utitlity Mode Functions
Function
INT. PARAMETER
TITLE EDIT
INPUT SELECT
OUTPUT MODE
FOOT SWITCH
MIDI CHANNEL
MIDI THRU
MIDI PGM TABLE
MIDI BULK DUMP
DEMO TONE TRIG
INI TITLE 1/2
INI TITLE 2/2
18
Type
Program edit
Program edit
System setting
System setting
System setting
System setting (MIDI)
System setting (MIDI)
System setting (MIDI)
MIDI utility
System setting
System setting
System setting
Description
Used to edit the internal parameters of the
currently selected program.
Allows editing of the title of the currently
selected program.
Sets the REV500 to use either mono or stereo
input
Switches between efffect output only and
effect output plus direct source output
Selects the REV500 function that can be
controlled by a connected footswitch
Sets the MIDI channel that the REV500 will
use to receive and send MIDI data
Sets whether the MIDI OUT terminal will act
as a MIDI OUT or merged MIDI THRU
Assigns REV500 programs to MIDI Program
Change numbers
Transmits REV500 program or system setting
data to another MIDI device
Sets the tone and trigger mode for the
REV500's audition function.
Allows editing of the first line of the initial
title message displayed at startup
Allows editing of the second line of the initial
title message displayed at startup
Page
9
9
14
14
14
16
16
16
17
15
15
15