Recording Notes - Yamaha PSR-270 Owner's Manual

3
Select a User song for recording.
This operation is the same as that of Realtime recording (page 81).
4
Select a track number.
Press the SONG MEMORY button corresponding to the desired track.
Recording to the Chord Track
A special Chord track is provided for recording accompaniment data.
This is automatically recorded to the Chord track (track 6). To select
the Chord track and turn on the accompaniment, press the ACMP
ON/OFF button.
ACMP SYNC- START/
ON/OFF START STOP
5
Start recording.
When the RECORD indication stops flashing and the track number starts
flashing, you can start recording. Record each note (or chord) and rest
individually, as described below:

Recording Notes

1) Select the desired position in the song (measure/beat) with
the +/- buttons. (Each press of the button moves one beat
forward or backward.)
2) Play the desired key or keys. (The note name is shown at the
top of display.)
When recording chords to the Chord track, make sure the
accompaniment is on, then play the desired chord in the
accompaniment section of the keyboard.
1 2 3 4 5
SONG TRACK
RECORD
ACMP ON
001 - 101
MEASURE
INTRO/
ri
ENDING
1 CHORD
6~16
SONG RECORDING
Unlike Realtime Recording,
Step Recording only allows
you to record one track at a
time; the Chord track
cannot be recorded
simultaneously with another
track.
More than one note can be
recorded at a time;
however, only the last
pressed note appears in the
display.
85