Samsung HW-MS750 User Manual page 26

adjusting the Soundbar volume with a tV remote control
Use the tV menu to set the tV speaker on a Samsung tV to external speakers.
(for more information, see the tV's user manual.)
• After installing the Soundbar, you can adjust the Soundbar's volume using the IR remote control
that came with a Samsung TV. (If you do not want to use this function, when the Soundbar is on,
press and hold the Surround button for 5 seconds. "off-tV reMote" appears in the Soundbar's
display and the function turns off.) To adjust the volume using only the Samsung TV remote control,
press and hold the Surround button for more than 5 seconds until "SaMSUnG-tV reMote"
appears in the Soundbar display.
– Each time the Surround button is held for 5 seconds, the mode switches in the following order:
"SaMSUnG-tV reMote" (Default mode) → "off-tV reMote" → "aLL-tV reMote".
• To adjust the Soundbar volume with the remote control that came with a TV made by a third party
manufacturer, turn the Soundbar on, press and hold the Surround button for 5 seconds
("off-tV reMote" appears on the Soundbar's display), release the Surround button, and then
press and hold the Surround button again for more than 5 seconds. ("aLL-tV reMote" appears on
the Soundbar's display.)
– This function may not be available, depending on the remote control.
– For manufacturers that support this feature, refer to the FULL MANUAL for your Soundbar on
the Samsung web site (www.samsung.com/support).
– This volume control function works with IR TV remotes only. It does not work with Bluetooth
TV remotes (remotes that require pairing).
08 SoftWare UPDate
When the Soundbar is connected to the Internet, software updates automatically occur even when the
Soundbar is turned off.
• To use the Auto Update function, the Soundbar must be connected to the Internet.
The Wi-Fi connection to the Soundbar will be terminated if its power cord is disconnected or the
power is cut off. If the power is cut off, turn on the Soundbar and reconnect it.
ENG - 22