Panel Controls And Terminals - Yamaha N-100 Owner's Manual

Panel Controls and Terminals

Panel Controls and Terminals
2
3
4
5
1 [POWER] switch ........................... page 12
For turning the power on or off.
2 [MASTER VOLUME] dial............... page 12
For adjusting the volume level of the entire sound.
3 [DEMO] button .................... pages 13, 14
For playing the demo songs and the 50 piano preset
songs. When you press the [DEMO] button, the but-
ton name will blink for a second.
4 [PIANO/VOICE] button
................................. pages 15, 17, 18, 20
For selecting voices from 10 internal sounds includ-
ing Grand Piano 1 and 2 (page 15). You can also
combine two voices (page 17) or add reverb effects to
the selected voice for your keyboard performance
(page 18). When you press the [PIANO/VOICE] but-
ton, the button name will blink for a second.
5 [SELECT] button................... pages 13, 15
For selecting a demo song for each voice, or one of
the 50 piano preset songs. You can also change the ten
Voices by pressing the [SELECT] button. When you
press the [SELECT] button, the button name will
blink for a second.
6 MIDI [IN] [OUT] terminals........... page 21
For connecting external MIDI devices, allowing the
use of various MIDI functions.
10
N-100 Owner's Manual
8 7
7 AUX OUT [L] [R](LEVEL FIXED) jacks
.....................................................page 21
For outputting the sound of the N-100 to an external
audio system, or connecting it to another device (MD
recorder, etc.) to record your performance.
8 [PHONES] jack..............................page 12
For connecting a set of standard stereo headphones,
allowing private practice.
9 Soft pedal (left), Sostenuto pedal
(center), Damper pedal (right)
.....................................................page 16
For producing a range of expressive effects similar to
those produced by the pedals on an acoustic piano.
6
9
1