AEG LM 324 Instructions For Use Manual page 5

8
safETy INsTrUCTIoNs
Warning!
fatal or dangerous to children! Children are unable to assess the risks
associated with this product! Choking and strangulation hazard!
do not allow children to play with the packaging materials and this product.
Warning!
▪
risk of injury! do not look directly into the light beam or shine the light in another
person's eyes; this can damage the retina of the eye.
▪
risk of injury! Batteries contain corrosive chemicals, which may leak. do not allow
chemical leakages from batteries to come into contact with eyes or skin.
▪
risk of injury! Batteries will explode, if thrown on a naked flame or exposed to
extreme heat. do not expose the equipment to extreme heat.
▪
Warning! Magnets can cause interference to electronic implants such as cardiac
pace makers and thereby endanger life. keep the fixing magnet out of direct
range of the implant (Minimum distance 10 cm).
▪
Caution! Magnets can erase data from data storage devices.
keep the fixing magnet away from data storage devices
UsE
Fixing
The MINI LaMp can, depending on area of application be affixed by the fold-out
hook or be attached to metallic surfaces by the fixing magnet.
Operation
The switch turns alternately the spot and panel lamps on and off.
MaINTENaNCE aNd sErvICINg
Care
▪
Clean the product with a soft, dry cloth.
do not use aggressive cleaning materials or solvents.
do not immerse the product in liquid.
▪
remove the batteries, when the product is not in use for an extended period.
▪
always check the product for damage before use.
Caution! do not continue to use the product if damaged (e.g. broken casing). In
the event of damage, repairs or other problems, take the product to the dealer
from whom you purchased the product or to other qualified personnel.
Installation and replacement of batteries
(Batteries are not supplied)
do not dispose of batteries in household refuse. Take expired batteries to your
dealer or to a battery collection point.
always replace all the batteries at the same time.
do not use batteries from a different producer.
1. Unscrew the 3 screws.
2. remove the cover
3. remove the 3 expired batteries.
4. Install 3 new aaa 1.5 v batteries in the correct position.
Incorrect installation of the batteries may damage the product.
5. replace the cover.
6. replace the 3 screws and screw them firmly in place.
GB
9