Using Surround Pan - Yamaha 02R96 Owner's Manual

Using Surround Pan

The 02R96 supports 3-1 and 5.1 Surround modes. Surround pan is independent of normal
panning. Normal panning determines how an Input Channel signal is panned between the
left and right channels of the Stereo out, whereas surround panning determines how an
Input Channel signal is panned among the Surround channels (i.e., the Bus Outs). The fol-
lowing table shows how Surround channels are handled by the Bus Outs.
Surround Mode
3-1
5.1
See page 116 for information on surround monitoring.
Selecting Surround Pan Modes
The Surround mode can be selected as follows.
Use the SELECTED CHANNEL PAN/SURROUND [DISPLAY] button to select
1
the Surround Mode page.
2 Use the cursor buttons to select the surround mode buttons, and press
[ENTER] to activate the selected mode.
The 3-1 Surround mode page is shown on the left; the 5.1 page on the right. The diagram
on each page shows the typical sound image placement and the Surround channel to Bus
Out configuration.
1 2
Left Right Center
Left
Left Right
Surround
Using Surround Pan
Bus Outs
3 4 5
Surround —
Right
Center
Surround
02R96—Owner's Manual
69
6
—
LFE