Yamaha WC42260 Owner's Manual page 56

56
Chapter 3—Operating Basics
Encoder Displays
Pan Mode, Surround L/R, and Surround F/R position
( indicates center position)
Aux/Mtrx Mode and Alt Layer
( indicates nominal position)
Surr LFE Level
( indicates nominal position)
Attenuator Parameter
( indicates nominal position)
Delay Feedback Gain, Delay Mix & EQ Gain Parameters
On/Off & Pre/Post Parameters
EQ On/Off, Phase On/Off, Insert On/Off, EQ Type, Gate On/Off, Comp On/Off, Aux Send
Pre/Post.
Scene Fade Time Parameters
DM2000 Version 2—Owner's Manual
Operation of the Encoder displays depends on the parameter assigned to the
Encoders, as follows.
Hard left Other position
Minimum (–∞) Other position
Minimum (–96 dB) Other position
Minimum (–96 dB) Other position
Negative value
( indicates 0%, ±0 dB)
Minimum
(Off when Fade Time is minimum)
( indicates at center)
Nominal
( indicates at nominal)
Nominal
( indicates at nominal)
Nominal
( indicates at nominal)
0%, ±0 dB
( indicates at 0%, ±0 dB)
On/Pre Off/Post
Other value
Center Hard right
Maximum
Maximum
Maximum
Positive value
Maximum