Voice Selection; Selecting & Playing The Vl1'S 128 Voices - Yamaha VL1 Owner's Manual

Voice Selection

Selecting & Playing the VL1's 128 Voices
One of the first things you'll want to do with your VL1 is select and
play some of its voices ... this section will show you how to do just that.
1.
Select the Play Mode
Press the P button so that its indicator lights and the word "PLAY" appears in
the upper left corner of the LCD panel.
A considerable amount of information appears on the play-mode display in addition
to the name of the currently selected voice. Many of the functions relating to this infor-
mation will be covered later in the manual. For now, here are the basics:
Play mode.
Element E1 name: Alto Sax
Mono voice,
using a single element.
The abbreviations in the section separated by a line at the bottom of the display
("Cnt1", "Cnt2", etc) indicate the functions of the corresponding function buttons
below the display: ¡ through •. These will be discussed later in this section.
Getting Started Voice Selection
Voice name: Alto Sax
Voice B02 (no. 18 of 128).
34
Reverb is ON.
Stereo output mode.
Effects in use: Pitch Change,
Feedback Delay off and
Studio type reverb.