Table of Contents
Advertisement
Before Using the H01
Turning the Power On
1.
Insert the plug of the power cable into the
AC connector on the instrument, then
plug the other end of the cable into the
proper AC outlet on the wall.
CAUTION
Never interrupt the power supply during the instrument load opera-
tion! Doing so can result in loss of data.
2.
Press the [POWER] switch to turn the
power on.
The power indicator located to the right of the
lights up.
NOTE
All current panel settings will be changed to the initial settings when turn-
ing the power off and on.
CAUTION
Never interrupt the power supply while the instrument is loading
data from a USB device! Doing so can result in loss of data.
CAUTION
Even when the instrument is turned off, electricity is still flowing to
the instrument at the minimum level. When you are not using the
H01 for a long time or during electrical storms, make sure you
unplug the AC power plug from the wall AC outlet.
Setting the Volume
Initially set the [MASTER VOLUME] slider about halfway
between the "MIN" and "MAX" settings. Then, when you
start playing, re-adjust the [MASTER VOLUME] slider to the
most comfortable listening level.
TERMINOLOGY
Using Headphones
Connect a set of headphones to one of the
[PHONES] jacks.
Two
[PHONES]
connect two sets of stereo headphones. (If
you are using only one set of headphones,
you can plug them into either jack.) It can also
connect to an amplifier/speaker system.
CAUTION
To protect your hearing, avoid listening to the H01 at a
high volume level for long periods of time.
10
H01 Owner's Manual
MASTER VOLUME:
The volume level of the entire keyboard sound.
jacks are provided. You can
POWER
switch
[
]
The level decreases.
Stereo mini
plug
(The shape of plug differs
depending on locale.)
The level increases.
Advertisement
Table of Contents
