Page 1
Operation and Service Manual for HERMetic OXY all versions Note: before using the instrument please read this book. This document is subject to changes without notice. Check updates on www.tanksystem.com or contact us at tanksystem@honeywell.com 50421/OXY/1005...
1. Table of contents TABLE OF CONTENTS GENERAL RECOMMENDATION FOR SAFE USE GENERAL INFORMATION ISCLAIMER HIPMENT NOTE NITIAL INSPECTION OCUMENTATION DISCREPANCIES ARRANTY PARE PARTS ERVICE AND EPAIR WORLDWIDE SERVICE STATIONS NETWORK OPERATION MAINTENANCE DRAWINGS 50421/OXY/1005...
2. General The HERMetic OXY is designed for sampling inert gas in closed tanks before crude oil washing. It consists of a rubber sampling hose with an on-line valve at the upper end, an open hose end for connecting to a portable gas analyzer (not supplied with the OXY), a weight at the lower end and an adapter with a hose adjusting nut.
4. General information 4.1 Disclaimer Warranty This manual is designed and written to provide 12 months after installation but max. 18 months information with regard to the subject matter after delivery ex works. involved. Enraf Tanksystem SA makes no warranty, express or implied, that it is fit for any The Vendor undertakes to remedy any defect purpose whatsoever;...
damage or failure of any kind connected with the use if its products or failure of its products to function or operate properly. Enraf Tanksystem SA do not assume the indemnification for any accident or damage caused by the operation of its product and the warranty is limited to the replacement of parts or complete goods.
Page 6
Service Request Customer's address: ..........................................................................................................Telephone: ....................Telex: ....................... Fax: ......................Type of unit or part: ..............................................................Short description of defective unit or part: ..............................................................................Do you want a quotation before repair is started:..yes / no..... Repaired unit has to be returned to the following address: ........................
6. Maintenance Care For long working life, keep the HERMetic OXY clean and well lubricated and, when not in use, stored it in a dry and protected location. When ordering spare parts, always state the drawing and the item number.