Basic Operation; Fonctionnement De Base - Yamaha CDX-393MKII Owner's Manual

POWER
1
1
Turn the power on.
2
Load a disc.
OPEN/
CLOSE
Display information during disc play
3 4 5 6 7 8 9 10 11 12
1 Shows the track number selected or being played.
2 Shows the time displays. (Refer to "Selecting time displays"
on page 10.)
3
CDX-593 and CDX-493
Shows the signal output level to an amplifier or the
headphones, adjusted by using the OUTPUT LEVEL
button.
4 Displays the CD track numbers (up to 20). After each track
is played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.
To turn off the power
Press the POWER switch again.
* If you turn on the power again with a CD in the tray, you can
start playing the CD automatically.
8

BASIC OPERATION

POWER
Label side up
Disc tray
SINGLE
SYNCHRO
SPACE PEAK
1
4
7
–
OUTPUT LEVEL
STOP
3
Close the disc tray.
4
Play will begin from the first track of the disc.
Notes
• After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the
total recorded time of the disc for a few seconds.
TOTAL
1 2 3 4 5 6 7 8 9 10 11 12
• You can also close the disc tray by pressing the PLAY button
(or button on the front panel), a number button, the
RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in any of these ways, play will
begin automatically, however, the display will not show the
total number of tracks and the total recorded time of the disc.
OPEN/
2, 3
DIMMER TIME CLOSE
TAPE CLEAR PROG
2 3
INDEX
+
5 6 I0
8 9 0
REPEAT RANDOM
SEARCH
+
SKIP
PAUSE PLAY
4
OPEN/
CLOSE
PLAY