Kenwood BL730 Series Manual page 7

cleaning
●
Always switch off, unplug and
dismantle before cleaning.
●
Never let the power unit, cord or
plug get wet.
●
Empty the goblet before unscrewing
it from the blade unit.
●
The goblet can be washed in your
dishwasher.
power unit
●
Wipe with a damp cloth, then dry.
●
Wrap excess cord around the
bottom of the power unit
blade unit
1 Remove the blade unit from out of
the base by pushing up from
underneath.
2 Remove and wash the sealing ring.
3 Don't touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don't immerse the blade
unit in water.
lid
●
Remove the seal using the tab
before cleaning the lid.
●
Wash both parts by hand, then dry.
other parts
Wash by hand, then dry.
auto clean (P)
1 Pour 500ml warm soapy water in the
blender.
2 Auto clean using the pulse (P)
setting.
3 Rinse, then dismantle and clean the
blades as recommended under
"blade unit".
4 Dry the parts thoroughly.
service and customer
care
●
If the cord is damaged it must, for
safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer.
If you need help with:
●
using your machine or
●
servicing, spare parts or repairs
Contact the shop where you bought
your machine.
.
4