Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear eye
Instructions
protection
1. SAFETY
WARNING! DO NOT use the tool if damaged or thought to be faulty.
‰
WARNING! Ensure that Health & Safety, Local Authority Regulations and general workshop practice Regulations are adhered to
‰
when using tools.
DO NOT use the tool for a task it is not designed to perform.
8
DO NOT use the tool unless you have been instructed in its use by a qualified person.
8
DO NOT operate the tool if you are tired or under the influence of alcohol, drugs or intoxicating medication.
8
Maintain the tool in good condition.
9
Follow all workshop safety rules, regulations and conditions.
9
Wear eye protection, protective gloves and safety footwear.
9
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
9
Keep children and non essential persons away from the work area.
9
2.
INTRODUCTION
Simple to use master kit has the capability of removing practically any locking wheel nuts. Kit includes shroud which protects the wheel
against any damage. Very effective and a must have workshop tool.
3. SPECIFICATION
Model no ................................................................ SX299.V2
Consumable parts:
Replacement disposable blades (pack of 10) ......... SX299DB
4. CONTENTS
No.
Part number
Description
1
SX299.V2-01
Impact driver
2
SX299.02
Centre punch
3
SX299.03
Hand protection ring
4
SX299.04
Main body & outer shroud
5
SX299DB
Blade C available in packs of 10
6
SX299.06
Blade A
7
SX299.07
Blade B
8
SX299.08
1/2" drive impact socket 24mm
© Jack Sealey Limited
MASTER LOCKING WHEEL NUT REMOVAL SET
SX299.V2
MODEL NO:
Wear protective
Wear safety
gloves
footwear
Original Language Version
SX299.V2
Issue 1
07/01/20
Advertisement
Related Manuals for Sealey SX299.V2
Summary of Contents for Sealey SX299.V2
- Page 1 SX299.V2 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Maintain the contact between the blade and the locknut and place the 24mm impact socket onto the main body. 6.9.6. Use either: Quality air impact wrench, heavy duty impact driver (standard tool unsuitable), breaker bar, see below. Original Language Version SX299.V2 Issue 1 07/01/20 © Jack Sealey Limited...
- Page 3 Insert the tool into the wheel recess and hammer the tool into the lock nut pattern, see fig.8. 7.4.3. Blade C needs to be ‘cut’ to a minimum of 3mm, see fig.9. 7.4.4. Always use Impact driver when possible to remove the locknut. fig.8 fig.9 Original Language Version © Jack Sealey Limited SX299.V2 Issue 1 07/01/20...
- Page 4 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...