Philips InnoSpire Go Faq page 2

Treatment
Q. How long will my treatment take?
A. It should take approximately four minutes for 2.5 ml salbutamol. Other medications may take
longer, but typically most will nebulize in under five minutes.
Q. What is the maximum fill level?
A. The maximum fill level is 8 ml indicated by the word MAX under the lid hinge.
Q. Can I use the device continuously or does it need a cooling down period?
A. InnoSpire Go is continuously rated. This means that it can be operated continuously without the
need for a cooling period.
Q. How do I know when my treatment is finished?
A. Your treatment is finished when the device beeps and the light ring flashes, InnoSpire Go will turn
off automatically.
Q. Can I use a mask?
A. Yes. A medium child mask is provided with the InnoSpire Go. A small child mask and an adult size
mask are also available separately.
Performance
Q. What is the flow rate?
A. Flow rate is only applicable to Jet nebulizers as they use a driving gas to create the aerosol. The
InnoSpire Go uses a vibrating mesh to create the aerosol.
Battery
Q. what type of battery is in the InnoSpire Go and how long will it run for?
A. It is a lithium-ion battery similar to that in a mobile phone. It will provide approximately 30
treatments per charge (120 minutes).
Q. How will I know when it needs charging?
A. The light ring at the front of the device will turn amber. This is indicating that your battery needs
charging.
Q. If the light ring is amber, will there be enough charge to take my treatment?
A. Yes. There will be enough charge for at least one more treatment. If the amber light ring flashes
and then switches off, there is not enough charge to take a treatment.
Q. Can I replace the battery?
A. No. It is sealed inside the device and is not replaceable.
Q. How long does it take to charge the battery?
A. The first time you charge the battery will take up to three hours and all further charges will take
less than two hours to fully charge.
Q. How will I know when the battery is fully charged?
A. The light ring around the on/off button will turn solid green to show it is fully charged.
2