GoPro HERO 4 Manual page 3

PICTURE 1:
Attach quick release buckle to 'Complete Unit' and secure it with a thumb screw
Slide quick release buckle into grip/clamp
PICTURES 2 & 3:
Attach quick release buckle to 'Complete Unit' and secure it with a thumb screw
Slide quick release buckle into gooseneck
Slide gooseneck into grip/clamp
Suction Accessory
- To attach to wall, slide bottom of camera with housing (not 'complete unit' because no grip at the bottom)
into suction cup with standard base and screw in using a thumb screw (standard base = picture 1)
- Should look like this before and after inserting the 'complete unit'
PICTURES 1 & 2:
Insert thumb nut piece into suction cup
Use thumb nut and screw to fasten thumb nut into suction cup
Insert camera in 'Complete Unit' in thumb nut
Fasten with thumb screw