Parameter Data Record; Dependencies When Configuring With Gsd File - Siemens SIMATIC ET 200SP Manual

Parameter data record

A.1

Dependencies when configuring with GSD file

When configuring the module with a GSD file, remember that the settings of some parameters
are dependent on each other.
Configuration with PROFINET GSD file and with PROFIBUS GSD file
The properties and their dependencies on measuring type and measuring range for
PROFINET and PROFIBUS are listed in the table.
Measure‐ Measuring
ment type range
Deactivated
Voltage ±320 mV
x = Property is allowed, - = Property is not allowed, * = Property is not relevant
Analog input module AI 2xSG 4-/6-wire HS (7MH4134-6LB00-0DA0)
Manual, 09/2018, A5E41867508A-AB
No supply voltage Short-circuit to
L+ ground
*
x
Diagnostics
Overflow / under‐
flow
* *
x x
A
Hardware inter‐
rupts
Wire break PROFI‐ PROFI‐
NET BUS
* *
x x
*
x
57