Bodyzone Connect; How To Register Your Account; Set Up Your Virtual Controllers - Breville BodyZone Instruction Book

BODYZONE CONNECT™

The Breville BodyZone Connect™ Heated
Blankets can offer remote operation by using
a home Wi-Fi connection and the BodyZone
Connect™ app downloaded to a compatible
mobile phone. The Wi-Fi function is available
on the following models only:
LZB518WHT
LZB538WHT
LZB558WHT
NOTE
To control the blanket using the app, the
physical controller must be plugged in to
an active power outlet and set to the AUTO
setting. If the controller is turned OFF or
disconnected from the power, then the app
cannot connect to it via the network.

HOW TO REGISTER YOUR ACCOUNT

1. Download the BodyZone Connect™ app onto
a compatible (see Note below) mobile phone
from Google Play or the Apple app Store,
depending on the device used.
NOTE
The BodyZone Connect™ app is compatible
with mobile phones running Android
or later and iOS devices 10.0 or later.
2. To register your account, open the BodyZone
Connect™ app and complete the required
fields by following the prompts. Tick 'via
email' or 'via phone number' to set up your
account.
LZB518_LZB538_LZB558_IB_Generic_C19_FA.indd 15
SINGLE/KING SINGLE
QUEEN
KING
5.0
®
NOTE
If entering a mobile phone number, ensure
the country code is added. For example,
for Australian mobile numbers, add the
country code as +61, leaving off the 0, then
add the rest of the number starting at the 4
i.e. +61 4XX XXX XXX.
3. A registration verification code will be sent
either to the mobile number entered via
SMS or to the email address entered. Type
the verification code into the app where
prompted to complete registration. Once
finished, the mobile will be logged into the
BodyZone Connect™ app.
NOTE
Phone numbers and emails are requested for
security verification purposes only and will not
be used for any promotional activities. More
information on Breville's Privacy Policy can be
found at www.Breville.com.
SET UP YOUR VIRTUAL
CONTROLLERS
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. To set up a virtual controller, slide the control
switch of the heated blanket's controller
(physical controller) from 'OFF' to 'AUTO'.
On the 'AUTO' setting the physical controller
will activate the Wi-Fi for usage, as well as
act as a memory or favourites function (see
'USING THE AUTO SETTING' on page 14).
NOTE
When using the MANUAL function, the
heated blanket can be controlled by the
buttons on the physical controller only.
The app will not operate under the manual
function.
NOTE
The heated blanket can only be switched to the
'OFF' position on the physical controller, not
through the mobile app virtual controller.
15
13/11/19 8:26 am