Cleaning The Outside - Fujitsu SP1120 Consumable Replacement And Cleaning Instructions

SP1120\1125\1130 Consumable Replacement and Cleaning

Cleaning the Outside

The outside of the scanner, including the ADF paper chute (feeder) and the stacker, should be
cleaned with a piece of dry cloth, a cloth moistened with Cleaner F1/mild detergent, or a sheet
of Cleaning Wipe.
ATTENTION
To avoid deformation and discoloration, never use paint thinner or any other organic solvents.
Be careful not to let any moisture or water get inside the scanner during cleaning.
It may take a long time to dry if an excessive amount of Cleaner F1/ mild detergent is used. Use it in
small quantity. Wipe off the cleaner completely to leave no residue on the cleaned parts
Cloth
CG00002-291501
Instructions
Cleaner F1 or mild
detergent
11