Advertisement
The simple configuration method is easy to use and quick to configure. When you take the unit out of
the box, configure it before connecting it to the VMware ESX server.
1. Make sure that the iSCSI Service is turned off.
2. Set the time to your time zone. NPT is recommended.
3. Hook up your UPS and configure it under Maintenance -> Power Management
4. VMware allows a maximum 2 TB LUN size, so remember this when you decide what disk and
volume layout you want.
5. When all configurations are finished, turn the iSCSI Service back on.
Complex Configuration (two or more ESX servers or a TS III iSCSI with capacity
greater than 4 TB)
Advertisement
