Arris TG3452 Self-Install Manual

Wow! self-install guide

Hide thumbs Also See for TG3452:

Download this manual

Arris TG3452

Self-Install Guide

You'll need:

a device to connect to the Internet

Device to connect to the Internet

Step 1. Connect your wireless router

1. Connect one end of the

wireless router.

2. Plug the

power cord

into the wireless router.

3. Allow the wireless router to boot fully and connect to the network. When all lights on the wireless router are solid

and no longer flashing, your router is connected.

Helpful Hint: If you would like to directly connect your computer to your wireless router, use the Ethernet cable

provided and plug it from your wireless router to your computer.

Let's get started

coax cable

into an available wall outlet in your home and the other end into the

WOW! will provide:

coax cable, ethernet cable, wireless router,

router power cord and install guide

Coax Cable

Ethernet Cable

Router Power Cord

Wireless Router

Install Guide

Page 1 Arris TG3452 Self-Install Guide Let’s get started You’ll need: a device to connect to the Internet WOW! will provide: coax cable, ethernet cable, wireless router, router power cord and install guide Coax Cable Ethernet Cable Wireless Router Device to connect to the Internet...
Page 2 Step 2. Accessing your default wireless router settings The WOW! technician has already activated your wireless router. See steps below to locate your wireless router’s Network Name and Password. • Locate the default Network Name (SSID) and Password (Pre-Shared Key) on a label on the side or bottom panel of your wireless router.