Certification; Spare Parts; Service And Repair - Honeywell HERMetic GTN Chem Operation And Service Manual

3.5

Certification

Enraf Tanksystem SA is
an ISO 9001 certified
company by Intertek and
MED-D by Det Norske
Veritas Certification
GmbH.
The equipment has been approved as non-
electrical equipment for potentially explosive
atmospheres by the following authorities :
ATEX
KEMA 06ATEX 0027
II 1 G c IIB T6 (Ta -20 to +80°C)
If you need a copy of any of this certificate
please contact:
Enraf Tanksystem SA
Rue de l'industrie 2
1630 Bulle, SWITZERLAND
Telephone : +41-26-91 91 500
Telefax : +41-26-91 91 505
Web site : www.tanksystem.com
E-mail : tanksystem@honeywell.com
3.6

Spare parts

Substitution of components may impact
safety. Use only original spare parts.
When ordering spares identify the spare part
by TS number and description. Refer to
section "Drawings".
Some spares might be repairable; in this
case send part to any authorized service
center or to the factory.
In case of urgency replacement units can be
available while stocks last.
50447/SGTN/1306
3.7

Service and Repair

The customer should take care of the freight
and customs clearance charges. If units are
sent on "freight collect " the charges will be
invoiced to the customer.
When returning units or parts for repair to the
factory please fill out a service request form
(see next page).
Traceability information are engraved on a
plate fixed to the sampler. The serial number
of the unit is as follows:
SN followed by a 4 digits number.
When returned to Enraf Tanksystem SA
equipment must be contamination-free. If
it is determined that the customers
equipment is contaminated, it will be
returned to the customer at the customers
expense. Contaminated equipment will
not be repaired until such time that the
customer decontaminates
equipment.
.
5
HERMetic Sampler GTN Chem
the said