Advertisement
Ensure devices are in the Factory Default state
With the address code wheels set to 000, insert one battery into the device.
The LED on the front will blink red if the device is in the factory default
state.
If the device is not in the factory default state, follow the directions below.
RESET DEVICES TO FACTORY DEFAULT
Back
Use SWIFT Tools to reset devices to the
factory default state
1. Insert the W-USB adapter into your computer and launch
the SWIFT Tools application
2. On the home screen, select Site Survey, Create Mesh Net-
work, or Diagnostics.
3. Click Operations and select Set device to factory default.
4. You are now on the Reset Devices screen. Select the desired
device and click Reset.
Front
Advertisement
