Acer Aspire One Installation Manual
Hide thumbs
Also See for Aspire One:
- User manual (1960 pages) ,
- Generic user manual (1454 pages) ,
- Quick manual (319 pages)
Advertisement
Quick Links
TouchKit Setup
Package Content
Controller Board Preparation
Reminder:
NOT tightened all the way down. Discontinue action
immediately as soon as force is felt on the housing.
Further tightening of the screws will cause touch
screen to crack resulting in inaccurate cursor.
Apply rubber adhesive on the bottom side of the Touch-Hub Controller
.
board as insulation
Be extremely careful when putting back on
the LCD housing; make sure the screws are
Advertisement
Related Manuals for Acer Aspire One
Summary of Contents for Acer Aspire One
- Page 1 TouchKit Setup Reminder: Be extremely careful when putting back on the LCD housing; make sure the screws are NOT tightened all the way down. Discontinue action immediately as soon as force is felt on the housing. Further tightening of the screws will cause touch screen to crack resulting in inaccurate cursor.
- Page 2 Acer Aspire One Installation Guide Step 1. Remove all 6 screws for LCD housing. Step 2. Remove both rubber feet. Remove back door for controller fitting. Remove all 8 screws for bottom housing. Step 3. Remove keyboard by pushing in the 3...
- Page 3 Step 4. Remove both FPC for keyboard and touchpad in the direction indicated. Step 5. Remove all 6 screws for keyboard housing. Setp 6. Use thin double-sided tape to secure the touch screen panel on the metal frame of the LCD module. Remove all 4 screws to detach the LCD module from the housing.
- Page 4 Step 7. Remove microphone connector. Remove camera module connector. Step 8. Use Camera Harness provided in the TouchKit to connect the camera module to the USB output port of the controller board. Step 9. Move the camera connector from the top to the left location of the LCD module indicated by the pictures.
- Page 5 Step 10. Hub Harness connecting the camera connector to the USB input port of the controller board. Hide all loose wires behind the hinge for proper fitting. Step 11. Remove speaker connector Remove all 5 screws to release motherboard from the bottom housing.
- Page 6 Step 12. Touch-Hub Controller Board To touch screen panel USB input (Hub Harness) USB output USB output (to camera module) USB output Step 13. Connect camera harness to the USB output port of the controller board and slide it underneath the chassis from right to left direction.
- Page 7 Step 15. Place Shock Absorber Rubber on the metal frame of the LCD module surrounding the touch screen panel. Be extremely careful when putting back on the LCD housing; make sure the screws are NOT tightened all the way down. Discontinue action immediately as soon as force is felt on the housing.