Siemens SIMATIC NET SCALANCE S615 Configuration Manual page 285

Description
The page contains the following boxes:
● Connection name
This table contains the following columns:
● Select
Select the check box in the row to be deleted.
● Name
Shows the name of the VPN connection.
● Operation
Specify who establishes the VPN connection. You will find more detailed information in
"Technical basics > VPN connection establishment (Page 54)".
– Disabled
– start
– wait
– on demand
– start on DI
– wait on DI
● Keying Protocol
Specify whether IKEv2 or IKEv1 will be used.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Enter a name for the VPN connection and click "Create" to create a new connection.
The VPN connection is disabled.
The device attempts to establish a VPN connection to the partner.
The device waits for the remote station to initiate the connection establishment.
The VPN connection is established when necessary.
If the event "Digital In" occurs the device attempts to establish a VPN connection to the
remote station.
This is on condition that the event "Digital In" is forwarded to the VPN connection. To do
this in "System > Events > Configuration" activate "VPN Tunnel" for the "Digital In" event.
If the event "Digital In" occurs, the device waits for the remote station to initiate
connection establishment.
This is on condition that the event "Digital In" is forwarded to the VPN connection. To do
this in "System > Events> Configuration" activate "VPN Tunnel" for the "Digital In" event.
Configuring with Web Based Management
4.9 "Security" menu
285