Gentle Heat System - Whirlpool EL4030V Use And Care Manual

For models EL5030V and
GL503OV
Turn the Temperature Seledor to NO HEAT
FLUFF and the Cycle Control Knob to the
number of minutes you want in the TfMED DRY
cyde. Then push the Start Button.
NOTE: Repeat above steps if more time is
needed.
EL503OV and GUO3OV
For models EL6050V and
GL605OV
Turn the Cycle Control Knob to the desired
minutes you want in the NO HEAT/FLUFF cycle.
Then push the Start Button.
NOTE: Repeat above steps if more time is
needed.
ELWSOV md GLWWV
End-of-cycle signal
For models EL6050V and
GL605OV
The dryer sounds a signal to let you know when
the cycle is finished. The signal cannot be turned
off and is not adjustable.
The signal is helpful when you are drying
permanent press, synthetics and other items that
should be taken out as soon as the dryer stops.
3 9
'5'
/ =- \ \
Gentle Heat system
For models EL6050V and
GL605OV
For better fabric care, the Gentle Heat system
helps prevent overdrying. Drying temperatures
are automatically reduced to a lower heat setting
during the last few minutes of drying.
Gentle Heat is followed by a cool-down perii
in all cycles to make your clothes easier to handle.
12