Disassembly Flowchart - Epson M200 Series Service Manual

M200 / M205 / M100 / M105 Series

2.2.2 Disassembly Flowchart

WF-2540 / WF-2530 / WF-2520 / WF-2510 / WF-2010 series described in this manual have differences in their
structure because the same printer mechanism is used for some of them and the composition of housings or
functions differs.
The functions and differences according to the models are as follows.
Item
ADF/Scanner
2Line Bitmap type
Panel
LED & Button type
Wireless LAN
Wired LAN
Disassembly Flowchart Start Position
Item
ADF/Scanner
Panel
Wireless LAN
Wired LAN
Therefore, parts and units are colored and classified into 2 types in the flowchart given in this section.
Common parts/unit:
Model-specific parts/unit: Red
Disassembly/Reassembly
Table 2-2. Function List According to Models
M200 Series
p 34
Table 2-3. Components According to Functions
The following part is not mounted on the models without the ADF/Scanner.
• ADF/Scanner Unit
• Main Board FFC Holder
The shape and unit of components below differ due to the difference of specifications of Panel.
• Panel Unit
• Main Board
• Shield Plate
The Wireless LAN Module is not mounted on the models without the Wireless LAN.
The Ethernet Board Assy
The shape and unit of components of the
LAN.
Black
Disassembly/Reassembly Procedures
Multifunction Printer
M205 Series
O O
O O
--- ---
--- O
O ---
p 34
Specification
is not mounted on the models without the Wired LAN.
Housing Left Assy
Singlefunction Printer
M100 Series
---
---
O
---
O
p 37
differ due to the support/unsupport of the Wired
Revision A
M105 Series
---
---
O
O
---
p 37
32
Confidential