Advertisement
Quick Links
Emergency
downlight
EM120B
indoor
220V
240V
Test
EM120B MT
manual
EM120B AT
auto
Dimensions in mm
Ø66
Ø80
Inrush current
I mains (A)
I max
max/2
Tref
0000 000 00000
© 7 / 2018, Philips Lighting Holding B.V. All rights reserved
50Hz
LEDs
60Hz
CCT (K)
600
25
2
1 - 25
Inom (mA)
Imax (A)
Tref (µs)
MCB
B-10 A
B-13 A
B-16 A
I nom.
C-10 A
C-13 A
Time (us)
C-16 A
Round lens.
(Oval lens is
mounted).
Converter
GLOW
IP20
WIRE
650 °C
Lumen
P (W)
(lm)
185
Battery
Driver
Electrical
!
characteristics
113
48
1.2
Downlights
-
The luminaire shall be installed by a quali ed elec-
Max.
trician and wired in accordance with the latest IEE
electrical regulations or the national requirements.
-
The light source of this luminaire is not replaceable;
when the light source reaches its end of life
the whole luminaire shall be replaced.
-
Clean with dry cloth.
-
Philips Lighting warranty is applicable only if the
indicated drivers are used.
1/4
Battery
Max.
40 °C
Min.
0 °C
Ø mm
4
68 - 72
197
Printed in China
Data subject to change without notice
Keep for future reference: www.lighting.philips.com
P1
kg
33
4.5
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
Advertisement
Summary of Contents for Philips EM120B Series
- Page 1 Philips Lighting warranty is applicable only if the Time (us) Tref C-16 A indicated drivers are used. Printed in China 0000 000 00000 Data subject to change without notice © 7 / 2018, Philips Lighting Holding B.V. All rights reserved Keep for future reference: www.lighting.philips.com...
- Page 2 1000 The luminaire shall, under no circumstance, be covered with thermal insulation matting or Ø 68 - 72 similar material. Ø 6-9 mm 2 x 0.50-1.5 mm 0.5Nm...
- Page 3 Replacement battery (lifetime 4 years) Disconnect Replace 3, 2, 1 Replacement lens Oval lens for pathway application. -90° 90° -60° 60° -30° 30° 0° Beam angle C0: 150° C90: 70° Mounting height (m) Spacing distance (m) Compliant EUROPE standard EN1838 illminance requirement: Escape route up to 2 m wide, 1 lx on the central axis and 0.5 lx at 50% of the width.
- Page 4 Manual test version Test button Press test button once 30 second duration test Press test button 2 times within 2 seconds 3 minute duration test Indicator LED Press test button 3 times within 2 seconds 30 minute duration test Press test button 4 times within 2 seconds 3 hours duration test Self test version Once the unit is powered up it will automatically initiate a self test and diagnostics as follows:...