Other Functions; Making A Recording; Sleep Timer - Panasonic SA-XR25 Operating Instructions Manual

Other functions

DISPLAY RETURN
TV/VIDEO DIMMER SUBWOOFER MUTING
INPUT MODE
INPUT MODE -TEST/–SETUP –/L +/R
–/L
TONE/
SLEEP BALANCE LEVEL EFFECT
STEREO/ DOLBY
2CH MIX PRO LOGIC NEO:6 SFC
TONE/
BALANCE
Input mode
This unit automatically detects whether input is digital or analog, but you
can fix the input mode.
Press [INPUT MODE] to select "AUTO", "ANALOG"
or "DIGITAL".
Balance
You can adjust the balance of the front speakers.
1. Press [TONE/BALANCE] to select "BALANCE".
2. Press [–/L] or [+/R] to adjust.
Tone
You can adjust the level of the bass and treble.
1. Press [TONE/BALANCE] to select "BASS" or
"TREBLE".
2. Press [–/L] or [+/R] to adjust bass/treble.
For your reference
¡To adjust the tone
The STEREO mode must be on and input must be either analog or
PCM signals. You cannot adjust the tone if DVD 6CH is selected.
Re-master
SA-XR45
This original Panasonic feature boosts the frequencies of the higher
harmonics that are lost during recording due to compression.
Press [MULTI-SOURCE DIGITAL RE-MASTER] to select
"EFFECT 1", "EFFECT 2", "EFFECT 3" or "EFFECT 4".
When Re-master is on, the current level appears, then each time you
press the button:
EFFECT 1: for fast tracks (pop and rock)
EFFECT 2: for tracks with a variety of tempos (jazz)
EFFECT 3: for slow tracks (classical)
EFFECT 4: for compressed audio signals
OFF: the re-master processing is off.
FM MODE MEMORY PRESET TUNE 2 TUNE 1 VOLUME
INPUT SELECTOR
MULTI-SOURCE ENHANCED
DIGITAL RE-MASTER SURROUND BAND
+/R
DOWN UP PHONES
MULTI-SOURCE
DIGITAL RE-MASTER

Making a recording

POWER 8 ^ % DIGITAL EX % DIGITAL % PL2 DTS 96/24 DTS-ES DTS NEO:6
Recording on other equipment
You can record to a tape deck connected to TAPE REC (OUT), a VCR
connected to VCR OUT (SA-XR25), a DVD recorder/VCR connected to
DVR/VCR OUT (SA-XR45), or digital recording equipment connected to
DIGITAL OPTICAL OUT.
See the recording unit's operating instructions for details on how to
prepare it for recording.
1. Press [INPUT SELECTOR] to select the source to
be recorded.
2. Begin recording.
Follow your recording unit's operating instructions.
3. Start the source to be recorded.
Follow your equipment's operating instructions.
¡ With a tape deck, you can record any analog source except TAPE.
¡ With a VCR, you can record any analog source except VCR
(SA-XR25).
¡ With a DVD recorder/VCR, you can record any analog source except
DVR/VCR (SA-XR45).
¡ With digital recording equipment, you can record any digital source
without copy protection.
¡ When you select DVD 6CH INPUT mode, only sound from the front
left and right channels is recorded.
¡ Some sources do not allow digital recording. Connect through the
analog terminals and select "ANALOG" input.

Sleep timer

INPUT MODE -TEST/–SETUP
SLEEP TONE/
SLEEP BALANCE
STEREO/ DOLBY
2CH MIX PRO LOGIC
The SLEEP timer can turn the unit off after a set time.
It does not control any other components.
1. Press [SLEEP].
SLEEP / OFF
2.
Within 5 seconds
Press –/L] or [+/R] to select the required time.
[
The display changes as follows:
30 , / 60 , / 90 , / 120 (in minutes)
To check the setting
Press [SLEEP] once.
¡The time remaining appears.
To change a setting
Repeat the procedure from the beginning.
INPUT SELECTOR
FM MODE MEMORY PRESET TUNE 2 TUNE 1 VOLUME
INPUT SELECTOR MULTI-SOURCE ENHANCED
BAND
DIGITAL RE-MASTER SURROUND
DOWN UP
–/L +/R
–/L +/R
LEVEL EFFECT
NEO:6 SFC
PHONES
21