Assembling - Philips Avance HR2355/08 User Manual

Assembling

• Make sure to tighten the front panel knobs during assembly.
• Make sure the appliance is not plugged in when assembling the appliance.
1
Push the mixing chamber into the appliance.
2
Point the mixing paddle to the hole in the main
unit. Insert the mixing paddle all the way into the
main unit.
3
Attach the disc holder onto the appliance.
❶ Disc holder safety switch
❷ Disc holder safety switch lever
Note:
• Check that the safety switch ❶ and safety
switch lever ❷ are set as shown in the
illustration to the right.
12 English
Follow below assembling steps to install
the pasta maker.
Important
1
2