Problems With Nec Express5800 Ft Series Setup; Problems With Master Control Menu - NEC Express5800/320Lb User Manual

Problems with NEC Express5800 ft series Setup

The following message is displayed when the setup starts.
The specified disk is not found. Terminating SW installation.
→ The disk to install the system is not connected properly. Check if the hardware is
properly installed and connected.
The following message is displayed while copying files from CD-ROM.
xxxxx : Not Ready xxxxxxxxxxxxxxxxxxZ
xxxxx(A), xxxxx(R), xxxxx(F)
→ Press R. If this message still appears, perform the setup again. If the error
persists, contact your sales agent to examine the CD-ROM drive.
Entered an incorrect Product ID or CD-key.
→ You will be prompted to enter again when the entry you made was incorrect.
Enter the correct one.
Failed to setup in detail for network adapter.
→ The detailed setup of network adapter is not available in setup of NEC
Express5800/ft series. Open the control panel after starting Windows 2000
Advanced Server to configure the network adapter.

Problems with Master Control Menu

Failed to read online documentation
Is HTML browser installed properly?
→ Online documentation is an HTML-format file. Install the HTML browser
(Internet Explorer 5.x or later) in your operating system.
Is HTML file properly associated to the browser software?
→ Online documentation accesses the local files in CD-ROM.
If the extension of HTML file (.htm or .html) is not associated to your browser
correctly, the local HTML file may not be browsed from Internet Explorer or the
other applications. Initialize your browser and set the association of extension
(.htm or .html) correctly.
Troubleshooting 7-33