Panasonic DMR-E60S Operating Instructions Manual page 33

Press [2] to
select "Erase" and
press [ENTER].
The program is erased.
Press [2] to set
protection and press
[ENTER].
Press
[ENTER] at
the start point
of the section
SELECT
you want to
ENTER
erase.
Press [3, 4] to select "Next" and press [ENTER], then press [2] to
select "Erase" and press [ENTER].
Repeat to enter other sections.
[Note]
≥ Use [6], [5] and slow-motion (
≥ Play pauses if the end of the program is reached during this procedure.
≥ You may not be able to specify points within 3 seconds of each other.
≥ You cannot specify an end point before a start point.
≥ You cannot specify points on still pictures in the program.
≥ The disc's available recording time may not increase after erasing short segments.
Press [ENTER] at
the point you want
to divide the
program.
To confirm the division point
Press [3, 4] to select "Preview" and press [ENTER]. (Play will
begin from a point 10 seconds prior to and after the division
point.)
To change the division point
Press [3, 4] to select "Divide" and press [ENTER] at the point
you want to change.
[Note]
≥ The disc's available recording time may not increase after
erasing short programs.
≥ Computer data cannot be erased.
≥ The available recording time on DVD-R does not increase when
you erase programs.
DIRECT NAVIGATOR
The lock symbol
3
appears when the
program is write-
protected. 3
Shorten
Segment
03 PLAY
Start
End
Next
Exit
3 0 : 00 . 01
Start End
RETURN
0 : 00 . 01 – : – – . – –
page 20) to find the start and end points.
Press [3, 4] to
Once you divide the program,
select "Exit" it will not be restored to the original.
and press
[ENTER].
No CH DATE TIME TITLE EDIT
1
4
01 6/20 WED 10 : 00 AM Dinosaur
1
02 6
6/20 WED 9 : 00 PM Auto action
1
03 13
6/20 WED 11 : 00 PM USJ
1
1
TOTAL 3 No SELECT
0 ~ 9
RETURN
ENTER
Press [ENTER] at
the end point of the
section you want to
erase.
Remaining Recording Time
Corresponding PLAY LIST will also be erased.
Erase
Divide Program
Divide Cancel
SELECT
RETURN
ENTER
[Note]
≥ The divided programs retain the title and CPRM property (
54) of the original program.
≥ A minute portion of the recording directly preceding the division
point may be lost.
≥ It is not possible to carry out Divide Program in the following cases:
–when the program is extremely short.
–when the total number of programs is more than 99.
Shorten
Segment
03
Start
End
Next
Exit
3 3 0 : 10 . 15
SELECT
Start End
ENTER
RETURN 0 : 00 . 01 0 : 10 . 15
Press [3, 4] to
select "Exit" and
press [ENTER].
Shorten Segment
Press [2] to
0:19 SP
select "Erase"
Cancel
and press
SELECT
RETURN
ENTER
[ENTER].
Press [2] to select
"Divide" and press
[ENTER].
The program is divided.
page
33
RQT6981