Pip Operation With A Vcr - No Cable Box - Panasonic CT-27D32 Operating Manual

2 Tuner PIP Operation with a VCR - NO Cable Box
This television includes a two tuner Picture In Picture (PIP) feature. This allows viewing two (2) live broadcasts at the same
time without or with an external video source (VCR).
Connect your television to a VCR, as shown.
TO AUDIO
L
ANT IN
R
CABLES NOT SUPPLIED
Note: The Remote Control must be programmed with the supplied codes to operate the VCR.
Procedure
Press the PIP button on the Remote Control to display the PIP frame on screen.
Note: The audio is from the Main Picture only.
To view an external video source in the PIP frame:
1. Press the TV/VIDEO button on the Remote Control to select the same video input to which your VCR is connected.
2. Verify the VCR is on.
3. Choose channels for the Main Picture by pressing the TV button on the Remote Control and using the numeric keypad or CH
up/down button.
4. Choose channels for the PIP frame by pressing the VCR button on the Remote Control and using the VCR/DBS CH up/down
buttons.
CONNECTIONS ON BACK OF TV
COMPONENT
R AUDIO
VIDEO INPUT
AMP
P
R
INPUT 1
S-VIDEO
R AUDIO
INPUT 2
The SWAP button switches the PIP and
Main Picture source. Press the RECALL
button for on screen PIP and Main Picture
source status.
L
P Y/VIDEO
B
VIDEO
L
SWAP and RECALL Buttons
O E
PTIONAL QUIPMENT
VCR
VIDEO OUT
ANT IN
L
AUDIO OUT
Incoming
R
Cable
ANT OUT
C
ONNECTIONS
9 ?