3.4
Parameter Settings
This section describes how to set parameters required for the programmable controller using GX Works3. To set the
parameters, connect the personal computer, the programmable controller, and the inverters over Ethernet.
1.
In the "Navigation" window, select [Parameter] [FX5UCPU] [Module Parameter] [Ethernet Port].
If the "Navigation" window is not displayed, select [View] on the toolbar [Docking Window] [Navigation] to
open the window.
FX5U CPU module
Hub
Ethernet
FR-E800-E
FR-E800-E
3 PROGRAMMABLE CONTROLLER SETTINGS
3.4 Parameter Settings
3
20